PLUS AQUA

PLUS AQUA

PLUS AQUA is a very fast, one-pot photopolymer direct emulsion. PLUSAQUA has been specifically formulated for use in the textile industry for printing imprinted sportswear using water based inks

Features

·SBQ one pot garment emulsion for use with water based garment inks.

·36% solids for good build on the range of meshes that are typically used for garment printing.

·Fast exposing with a good latitude.

·Quick washout and excellent print quality.

Benefits

·Ready to use one-pot formulation.

·Very good coating quality and rapid drying speed.

·Short exposure times for better productivity.

·Resistant to most water based textile inks.

·A very good all round emulsion for the busy textile printer.

Applications

·PLUS AQUA is designed for printing garments using Plastisol and water based inks only.

Additional Information

WORKING INSTRUCTIONS

PLUS AQUA is pre-sensitised and can be used straight from the pot for short run applications. However, if greater water resistance is required PLUS AQUA can be used with the Diazo powder supplied with the emulsion

SAFE LIGHT WORKING

PLUS AQUA is extremely sensitive to UV light and will ‘fog’ easily unless handled under good yellow safe light conditions. Similarly, coated screens must be handled under the same safe light conditions. Always store and use the product in original container, replacing lid after use. Even if the product is to be used without the Diazo addition then it should be stirred thoroughly prior to use.

If the Diazo addition has been made, leave the emulsion for at least 1 hour to de-gas prior to use.